ViLX-Commander Graphics system
Full 23″ touchscreen GUI for control of the EVCS and assist call points.
Key features:
- Touchscreen Panel PC with Solid State Drive
- Integrated Telephone
- Handset Full Status indication
- Extensive Logging of all Calls and Faults
- Integrated Assist Call with acknowledge meeting BS8300
- Simply Import Graphics and add Buttons in the Editor
- COTS not Bespoke Software
LX-Commander is a replica of the master station (which still must be fitted) and allows hi-resolution maps or graphical representations to be displayed with buttons overlaid representing the EVCS outstations and Assist Call emergency assistance alarms. Area buttons allow screens to be linked enabling overview and zoom screens to be quickly implemented.
The application contains full editing capabilities, password protected, allowing the user or engineer screens of bitmaps or JPEGs to be imported, allowing a COTS approach to the GUI with maximum flexibility without all the issues attached with bespoke software. Everything is contained within a panel PC (except for the EN54-4 power supply) and a simple cat5 cable connects to the nearest expander.
Screen |
|
| Resolution | 1920 x 1080 |
| Screen Size | 21.5” Full Colour TFT |
| Touchscreen | Capacitive multi-touch |
| Luminance | 250 cm/m2 |
Panel PC |
|
| CPU | Celeron N2930 1.8GHz |
| Chipset | SoC |
| Memory | 4GB DDL 1600MHz |
Power Supply and Charger |
|
| AC input | 230VAC +/- 10% 50/60Hz |
| Internal supply | 27V DC |
| Supply | Monitored Open, Short, Fuses, High Impedance |
| Protection | Deep discharge, Short, Thermal |
| Battery type | 2 x 12V 7AH VRSLA |
| Mains fuse | 240V 1A HRC |
| Battery fuse | 3A |