Select Page

Lexicomm 2-8 Network Master Station

Lexicomm EVCS is suitable for installations from 1 to 8 lines. It is radially wired with no software as it is a “Plug and Play” system. It can monitor disabled refuge, fire telephone, and emergency assistance alarms as standard. It has easy to use controls, 8x front panel buttons with 8 RGB line status LEDs, and 7 system status LEDs. Master stations can be expanded up to 8 lines using ViLX-LC2 dual line cards. Built-in network allows for a single repeater station, or it can form part of a larger Lexicomm Network system as below. Compliant to BS5839:9 (2011).

Our Products

ViLX-228N-0

0 line Repeater Station. Requires 1x 12v 7AH VRSLA battery for 24hr standby.

ViLX-228N-2

2 line Master Station. Requires 1x 12v 7AH VRSLA battery for 24hr standby. Includes 1x dual line card fitted.

ViLX-228N-4

4 line Master Station. Requires 1x 12v 7AH VRSLA battery for 24hr standby. Includes 2x dual line card fitted.

ViLX-228N-8

8 line Master Station. Requires 1x 12v 7AH VRSLA battery for 24hr standby. Includes 4x dual line card fitted.

ViLX-LC2

Lexicomm 2 way line card PCB to allow the expansion of the ViLX-228 Master Station. Supplied with fixing screw, EOL Resistor and two part line connectors. Maximum 4 line cards total per unit.

ViLX-RAP

Lexicomm Remote Alarm Panel for the remote annunciation of the operation of either the EVCS and/or Assist Call. Typical uses are where the Master Station is located in a non-staffed area.