ViLX-EX8-8 System Expander Panel
Eight line system expander for use with the ViLX-TMS adds eight line of EVCS.
- Fully Compliant to BS5839-9:2011
- Integrated Assist Call with acknowledge meeting BS8300
- 1.5A EN54-4:A2 PSU
- Full Duplex operation
- Wall mount enclosure
- Full Status indication
- Inbuilt networking
The Lexicomm ViLX-EX8 system expander panel is utilised to expand the Lexicomm Network System, it can accept up to eight lines of outstationand is compatible with all Lexicomm devices.
Lines auto identify by flashing Red for EVCS calls, Blue for assist calls or flashing Green for Connected calls as detailed in BS5839pt9:2011.
The ViLX-EX8 has inbuilt networking allowing it to form one of the 64 panels on a Lexicomm network .
The display on the front of the ViLX-EX8 gives the current call or fault status of each line of the local panel aiding fault finding.The case is made from powder coated zintec, with fourteen 20mm cable knock-outs provided for all necessary cables as well as space for the single 12V 7AH VRSLA backup battery which is required.
Power Supply and Charger
|AC input||230VAC +/- 10% 50/60Hz|
|Internal supply||5V, 16V, 27V DC|
|Supply||Monitored Open, Short, Fuses, High|
|Protection||Deep discharge, Short, Thermal|
|Battery type||1 x 12V 7AH VRSLA|
|Mains fuse||240V 1A HRC|
|Battery fuse||750mA PTC|
|Lines||2-8 in 2 line blocks|
|Remote enable||Short to use|
|End of line||10KΩ|
|Number||2, Fault & In use|
|Type||Volt free relay|
|Contact||30V DC 1A|
|Line LEDs||8, RGB|
|State LED||1, RGB indicator|
|Fault LEDs||3, PSU, System, General|
|Supply LEDs||2, AC ,DC present|
|Cores||2x2 core 1mm or 1.5mm|
|Distance||500m between Panels. Total Network perimeter 4km.|
|Product Family||BS5839-pt9, BS9999, BS8300|